CatalogTypes of anticorrosive coatings

Lifting chains. Strength Class 10. EN 818-6

Material: High-alloyed carbon steel
Purpose: These chains are intended for use with lifting machinery as well as for manufacture of cargo fastening means.
Standard: EN 818-6
Coating: KC, TEC, ZN, DHG, OKP
Example of order: Chain 10 - 6х18 EN 818-6 КС
Certification: Certificate of Quality, RRR certificate (Russian River Rigistry), RS Certificate (Russian Maritime Register of Shipping), acceptance by the Military Representative Office of the Ministry of Defense of the Russian Federation
 рис
 
Dimensions and weight of chains EN 818-6
Grade,
d
Pitch
p
Outside width,
b
Workload
Destructive load,
not less than
Rated weight
1 m of chain
mm
t
kN
kg
6
18
22.2
1.4
56.5
0.8
7
21
25.9
1.9
77
1.1
8
24
29.6
2.5
101
1.5
10
30
37
4
157
2.3
13
39
48.1
6.7
265
3.9
16
48
59.2
10
402
5.8
18
54
66.6
12.5
509
7.4
19
57
70.3
14
567
8.1
20
60
74
16
628
9
22
66
81.4
19
760
11
23
69
85.1
20
831
12
26
78
96.2
26.5
1060
15
 
The minimum relative elongation at break is 25% for the chains in their natural (uncoated) state and 20% for the chains with color coating, which increases the strength.
Rated stress 1000 N/mm2 corresponds to the quality class 10 in accordance according to EN 818-1.
The value of the allowable carrying capacity of chains varies depending on the range of operating temperatures according to DIN 818-6.
 
Allowable load showed as % of the indicated load when using the chains within the following temperature ranges
from -40 ° C to 200 ° C
over 200 ° C up to 300 ° C
over 300 ° C up to 400 ° C
100
90
75